Plating
Electroplating Anodes 2 Pack
The Anode supplies metal ions to the solution for plating. The Anode slowly wears away during plating and eventually needs to be replaced. Clean the Anode Bar after every few minutes of plating to remove the dark buildup. (Use an old toothbrush & distilled water).
Electroplating Brushes Set Of Three
The Tin-Zinc Electroplating System allows you to easily plate clean parts like in-place nuts and bolts. Connect the large clamp to the part to be plated, connect the small clamp to the end of the Electroplating Brush, and dip brush into the Electroplating Solution.
EW Electropalting Electrolyte Solution
Replacement Electrolyte can be used to replace contaminated solution or for plating larger parts. This Solution contains Sulfuric Acid. HANDLE WITH CARE to avoid skin and clothing contact! Use our Disposable Nitrile Gloves.
EW Electroplating System Tin Zinc
This kit solves problems of sending parts out to expensive plating shops, or storing dangerous chemicals by allowing you to conveniently plate almost any metal part at home.
EW Metal Blackening Solution 1 Pt
Replacement Metal Blackening Concentrate keeps your Metal Blackening System operating.
EW Clear Zinc Aerosol 12 oz
Duplicate Plating with the Ease of an Aerosol Application - Clear Zinc duplicates the exact appearance of Clear Zinc plating.
EW Zinc Phosphate Aerosol 12 oz
Duplicate the Factory Appearance of Zinc Phosphate - Zinc Phosphate duplicates OEM Zinc Phosphate plating.