Specialty Coatings
EW Extreme Diamond Clear 8 oz
The ultimate clear coat! We asked our chemist to develop a clear coat that is chemically resistant, can withstand high tempearatures and has superior UV protection.
Trim Removal Set All Three Tools
There are many slips, retainers and fasteners to be removed during interior work. These tools fit most cars and get the job done right. A. Door panel clip lifter protects door panels while removing the clip. B.
EW Wrinkle Paint Black Aerosol 12 oz
Reproduce the original wrinkle finish on parts such as heater boxes, dashboards ignition wire holders, valve covers and more. Tack-free in 20-30 minutes. 24 hours for full hardness. For metal only. Each can covers 4 sq. ft. Buy 2 or more and SAVE!
Plasti Dip Black
Helps make your tools safer and more comfortable to use. Bonds to metal, wood and most other surfaces. Just dip your tools and let them air dry. Won\'t chip, crack or peel under normal use. Flexible from -30 degrees F to 200 degrees F. Acid and salt water resistant.
Electroplating Anodes 2 Pack
The Anode supplies metal ions to the solution for plating. The Anode slowly wears away during plating and eventually needs to be replaced. Clean the Anode Bar after every few minutes of plating to remove the dark buildup. (Use an old toothbrush & distilled water).
Electroplating Brushes Set Of Three
The Tin-Zinc Electroplating System allows you to easily plate clean parts like in-place nuts and bolts. Connect the large clamp to the part to be plated, connect the small clamp to the end of the Electroplating Brush, and dip brush into the Electroplating Solution.
EW Electropalting Electrolyte Solution
Replacement Electrolyte can be used to replace contaminated solution or for plating larger parts. This Solution contains Sulfuric Acid. HANDLE WITH CARE to avoid skin and clothing contact! Use our Disposable Nitrile Gloves.
EW Electroplating System Tin Zinc
This kit solves problems of sending parts out to expensive plating shops, or storing dangerous chemicals by allowing you to conveniently plate almost any metal part at home.