Brake Tools
Tubing Flaring Tool 3/16" Adapter
This replaces the adapter originally included with your 49001 Double/Single Flaring Tool. Required for forming double flares.
Tubing Flaring Kit Double Single
Fabricate double-compression lines (brake) or single-compression lines (fuel, etc.) in steel, aluminum, or copper. Not recommended for stainless or tubing walls thicker than 0.040". Handles 3/16", 1/4", 5/16", 3/8" and 1/2" O.D. tubing. Limited 1 Year Manufacturer's Warranty.
Tubing Bender General Purpose
Heavy-duty quality construction. Doesn't collapse or distort tubing. Bends 3/16", 1/4", 5/16" and 3/8" diameter tubing.
Seal Puller
Removing an inexpensive seal can often result in expensive damage if the wrong tools are used. Many areas such as wheel bearing seals, automatic transmission pumps, tailshaft housing, and other parts, especially those made of light alloy, are too delicate for rough handling.
Tubing Bender Rolling
For smaller diameter (3/16" and 1/4" O.D.) coated tubing, use the rolling action tubing bender. It utilizes a free-rolling follower CAM to minimize stretching and distortion when bending tubing. This produces uniform, distortion-free, tight, 180 bends down to a 1" radius.
Tubing Bender Heavy Duty
For larger diameter tubing (5/16" and 3/8" O.D.) use the heavy-duty tubing bender, which will bend thick-walled tubing easily. Comes apart for easy placement over long pieces of tubing. Free-rolling CAM principle minimizes stretching and distortion.
Tubing Bender Set Rolling And Heavy Duty
Here are 2 essential tools when forming coated tubing: rolling action tubing bender (3/16" and 1/4" O.D.) and heavy-duty tubing bender (5/16" and 3/8" O.D.) for thick walled tubing. Both utilize a free-rolling follower CAM to minimize stretching and distortion.
Brake Line Tubing 25' 1/4"w/14 OE Fittings
This corrosion-resistant steel tubing is just like the original on most cars. All you need is a tubing bender and flaring tool and you're ready to create a replacement line or even a custom one. Each kit contains 25 ft. of steel tubing (.
Brake Line Tubing 25' 3/16" w/16 OE Fittings
This corrosion-resistant steel tubing is just like the original on most cars. All you need is a tubing bender and flaring tool and you're ready to create a replacement line or even a custom one. Each kit contains 25 ft. of steel tubing (.
Brake Line Tubing 25' 5/16" w/10 OE Fittings
Corrosion-resistant steel tubing like OEM on most cars. Use with our tubing bender(49002) and flaring tool(49001) to create replacement or custom lines. This corrosion-resistant steel tubing is just like the original on most cars.